Speco Technologies 4TL Manual de usuario Pagina 78

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 108
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 77
TL H.264 DVR User’s Manual
77
5.6.8.3 Motion Detect
This item allows users to enable or disable motion detection function of
DVR-4TL/8TL/16TL. Select <ON> to enable Motion Detect alarm events, or
<OFF> to disable. If motion detection function is enabled, it is required to
define motion detection parameters such as detection area and sensitivity
settings in <Detection Config>.
5.6.8.4 Motion Detect Indicator
This item allows users to display/ hide the motion detection indicators. Select
<ON> to display the indicators, or <OFF> to hide them.
5.6.8.5 Detection Config
If motion detection function is enabled, it is required to define the motion
detection parameters such as detection area and sensitivity settings. Select a
channel for setting the parameters, move the cursor to <Detection Config>
and press ENTER. The Detection Configuration menu displays as follows.
Detection Config
1. Detected Area Setup
2. Sensitivity
3. Block Threshold
88%
4
Detected Area Setup
After selected this item, the detected area is displayed as follows. The
detection area consists of 192 (16×12) detection grids.
Use the Direction keys to move the cursor and press ENTER to select or
de-select a grid. Press MODE to select all of the grids for detection; press
MODE again to de-select all of the grids.
Vista de pagina 77
1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 107 108

Comentarios a estos manuales

Sin comentarios